AshGPS: Firmware, Software Update Notification
for Spectra Precision, Ashtech, Magellan Professional, Thales Navigation
Friday 31 May 2013
 
In This Issue:
MobileMapper 100 / 120: New Service Layer, GNSS Toolbox, MobileMapper Field/Office
MobileMapper 10: New Operating System, GNSS Toolbox, MobileMapper Field/Office
LayoutPro V2.1: Support for Focus 30 robot!
New FAST Survey User Manual
 
Please checkout the disclaimer under 'This AshGPS Mail List' below.
You can click on the link at the bottom of this message to get removed, it really does work! 
Mark's Gossip Corner

This week has brought quite a few new up firmware and software updates. If you had questions about the commitment of Spectra Precision to the MobileMapper line (MM120/MM10) all thsee new releases of firmware, toolboxes and MobileMapper Field for both devices should put your concerns to rest. These great products continue to evolve with suport and innovative features.

I have tested the new PM800 firmware (V1.6) and the PM220 firmware (V2.1) and they seem to be fantastic.

As a matter of housekeeping, I feel a need to reiterate this point: "The repair depot for ProMark 3, MobileMapper CX/CE and other legacy equipment that I have spoken of earlier this month (see [ here ]) has nothing to do with Spectra Precision or Ashtech. We (iGage) are doing the repairs, we are responsible for them and our service has nothing to do with the official repair path." Of course for current products, espeically those under warranty, you would be crazy to not avail yourself to the official factory repair path.
 
New ServiceLayer, GNSS Toolbox and MobileMapper Field/Office Available for MobileMapper 120 and MobileMapper 100
 
GNSS Service Layer / Toolbox: [ Service Lay info info ] [ Toolbox info] [ firmware/software ]
MobileMapper Field / Office: [ Field info ] [ Office info ] [ software ]
 
New Operating System, GNSS Toolbox and MobileMapping Field 3.5 for MobileMapper 10
 
Operating System: [ info ] [ firmware ]
GNSS Toolbox: [ software
MobileMapper Field / Office: [ Field info ] [ Office info ] [ software ]
 
New LayoutPro 2.1
 
LayoutPro V 2.1 with support for the Focus 30 robot is now available. If you layout buildings, forms, pad or lots then LayoutPro may be a real timesaver for you. Now that it works with the Focus 30 a single guy can layout, check and pre-pour verify the most complex of jobs.
 
LayoutPro 2.1 [ info ] [ software ]
 
New FAST Survey User's Manual

A new FAST Survey User's Manual (V3.1.12)  is available: [ here ]

This AshGPS Mail List
NOTE: This mail list is NOT produced, distributed or endorsed in any way by Trimble or Spectra Precision. The information presented does not reflect any official company viewpoint nor is it a reflection on them. This mail list is generated by me (Mark Silver,) I am just a person and not a company, it contains my personal observations. Any trademarks listed are the property of their owner and are only listed so we can talk about things in less-than-general terms.
 
If you have any questions, don't hesitate to email them to me. I will do my best to get you an answer. 

Hopefully you will continue to find these notifications a valuable resource, however if this message has found you in error, you can use the link at the bottom of this message to get off the list (really, it does work.) 

There is a complete list of all of the past notifications [ here ]. If you know of anyone with GPS equipment who might benefit from these update notifications you can add them to this list with this link: [ Add or Delete a user ].

If you would like a real-time, slightly less refined, more gossip oriented experience my BLOG at http://ashgps.wordpress.com might do. 

Good survey and mapping to you all! 

Mark Silver,
Igage Mapping Corporation, http://www.igage.com
ms@igage.com, +1 801-412-0011 x16
 
iGage Mapping Corporation, 1545 S 1100 E, Salt Lake City UTAH USA
www.igage.com