ASHGPS: 27 Dec 2010: Post-Processing DLL for ArcPad 10.0 on MobileMapper 100 Available
Hopefully you will continue to find these notifications a valuable resource, however if this message has found you in error, you can use the link at the bottom of this message to get off the list (really, it does work.)
1. Post-Processing for ArcPad 10.0 on the MobileMapper 100 / ProMark 100 / ProMark 200 platform is now available:
The 'official' ftp folder contains 494 files, totaling 158 megabytes and will be fairly difficult to download without a reasonable FTP client. I have provided a 93-megabyte, zipped, single file download, available from a HTTP source:
which should be MUCH easier to download.
I have personally installed and tested the DLL on a MM100 and other than the installation destination (details below), I have had no issues.
Post-Processing for the MobileMapper 100 is an option and requires an activation key:
| 990650 |
Post-Processing Option for ArcPad 10.0 on MM100 |
$495 |
There is a similar activation key for MobileMapping Field:
| 680547 |
Post-Processing Option for MobileMapper Field |
$495 |
however either key will enable both products. In other words: "If you purchase Post-Processing for ArcPad, the activation key will also work for MobileMapper Field" and "If you purchase Post-Processing for MobileMapper Field, the activation key will also work for ArcPad."
|
AshGPS Mail List Information
Hopefully you will continue to find these notifications a valuable resource, however if this message
has found you in error, you can use the link at the bottom of this message to get off the list (really, it does work.)
There is a complete list of all of the past notifications [ here ].
If you know of anyone with Ashtech equipment who might benefit from these update notifications
you can add them to this list: [ Add or Delete a user ].
Good survey and mapping to you all!
Mark Silver, Igage Mapping Corporation, ms@igage.com, +1 801-412-0011
|
