IN THIS ISSUE
 
New Zoom 90 FAQ Items:
 
Prism Vertical Offset
Touchscreen Lock
Long Distance Errors
Field Calibration
Battery Charger LED's
Scout, TRack, AiM Range
 
 
Get the Latest Version of the FAQ:
 
Updated FAQ for Zoom 90...
First off, thank you very much for purchasing a GeoMax Zoom 90 from us! We hope that your robot is serving you well, as always if you have questions, please give us a call.
 
Your name (actually your email) has been added to this mail list automatically because you purchased a Zoom 90 (or Carlson CR+) robot from us or have corresponded about purchasing one in the last 12 months.
 
If you don't want to receive periodic messages about Firmware/Software/FAQ information you can use the link at the bottom of this message to permanently get off the list.  
 
You can control iGage mailing list subscriptions [ here ]
 
 
We have added a few new sections to the Zoom 90 Frequently Asked Questions document:
 
Scout, TRack, AiM Range
Battery Charger LED Meanings
Do a Field Calibration at the First Sign of Trouble
Long Distance Measurement Errors
Locking and Unlocking the Touchscreen on the Primary Face
Adjacent Faces on ZPR1 360 Prism have a ~5mm Vertical Offset
360 Prism (ZPR1) Vertical Height
AiM: My robot never points at the target!
Leica (GeoMax) Prism Constants
 
You can get a copy of the latest version [ here ]. The best way to read it is to start at the bottom (where the new stuff is) and work back to the top.
 
If you have any questions, please send them to me and I will try to get them answered and added to the list.
 
FYI: The latest version of SurvCE that we recommend to run with the Zoom 90 is Version 6.05.04. If you are running version 5, or an earlier version of 6 drop us a note and we will help you get updated.
 
Mark Silver  ( ms@igage.com)
801-412-0011 x16
iGage Mapping Corporation
1545 S 1100 E STE 1, Salt Lake City UT 84105
Powered by YMLP.com