Photos: Liquid Rubber Europe (LRE Coatings BV)
------------------------------------------------------------------------------------------------------------------------------------------------
Project:
Hottub waterproofing with Liquid Rubber
Description:
In Finland they are very creative. As you can see on the pictures of the project below. They built a frame out of an old steel container. The frame was insulated with XPS insulation panels. All the joints of the insulation panels are covered with a specific tape. After that they asked the Liquid Rubber applicator to waterproof the entire construction.
The applicator applied a flatcoat on the surface to remove the porousness of the XPS. After this layer was fully dryed, a 2mm thick layer of Liquid Rubber SprayGrade was installed. The product is fully seamless and highly flexible. Because it is a liquid applied system, it can easily over all the difficult corners and upstands.
When the entire application is fully dry, they will start using the hottub outside. A very creative mindset and we love that Liquid Rubber is a part of it.
The client is happy, so are we!
Photos: Liquid Rubber Europe (LRE Coatings BV)
------------------------------------------------------------------------------------------------------------------------------------------------
Project:
Waterproofing outlets with Liquid Rubber HBS200
Description:
A very common problem is to realize a good waterproofing solution around pipes and outlets. Outlets come in all sizes and materials. They are usually made of plastics like PVC, PE, PP or Aluminium. These are usually difficult surfaces for waterproofing products to adhere on. Luckily, Liquid Rubber adheres perfectly to those surfaces. Combined with the fact that Liquid Rubber HBS200 is very easy to install makes it the perfect product to seal pipes and outlets.
On this job the surface that needed to be treated was cleaned very well. Then Liquid Rubber HBS200 was applied around the outlets and on the surface. A Geotextile was placed in the still wet Liquid Rubber. Afterwards a second layer of Liquid Rubber HBS200 was applied on top of the Geotextile.
A very easy installation but a very durable way of sealing an outlet. Liquid Rubber has an perfect adhesion and a very high flexibility of 900%. More than enough for the movement of the outlets.
